Recent Articles

Relaxation of a highly deformed elastic filament at a fluid interface

S. Ganga Prasath, Joel Marthelot, Rama Govindarajan, and Narayanan Menon

Phys. Rev. Fluids 1, 033903 (2016) - Published 8 July, 2016

When slightly bent, an elastic filament at a viscous interface straightens due to bending torques, but when greatly deformed, a nonlinear tensile force along the filament becomes equally important, and causes much faster relaxation. Asymmetries about the center relax even faster.

Capsule-train stability

Spencer H. Bryngelson and Jonathan B. Freund

Phys. Rev. Fluids 1, 033201 (2016) - Published 7 July, 2016

Highly confined capsules—most notably red blood cells—are observed to flow in a seemingly stable train. However, with less confinement this striking order is disrupted, and the train breaks apart into an apparently chaotic flow. Non-modal stability analysis of a model capsule train illuminates the mechanisms of the break-up.

Diffusiophoresis at the macroscale

Cyril Mauger, Romain Volk, Nathanaël Machicoane, Michaël Bourgoin, Cécile Cottin-Bizonne, Christophe Ybert, and Florence Raynal

Phys. Rev. Fluids 1, 034001 (2016) - Published 6 July, 2016

Extending the experimental study of diffusiophoresis to the large scale shows that its presence influences the global mixing performance at all the scales in the global system, ranging from nanoscale up to centimeter scale.

Relaxation or breakup of a low-conductivity drop upon removal of a uniform dc electric field

Javier A. Lanauze, Lynn M. Walker, and Aditya S. Khair

Phys. Rev. Fluids 1, 033902 (2016) - Published 5 July, 2016

Electric–field induced deformation and relaxation of a prolate low–conductivity drop. At time t=tinitial, a spherical drop is placed under a uniform DC electric field given by E∞, directed from left to right. The drop attains a steady–state three–lobed configuration at t=tdeform. Upon removal of the applied field, the drop achieves breakup at t=trelax via an end–pinching mechanism.

Volume entrained in the wake of a disk intruding into an oil-water interface

Ivo R. Peters, Matteo Madonia, Detlef Lohse, and Devaraj van der Meer

Phys. Rev. Fluids 1, 033901 (2016) - Published 1 July, 2016

As a disk moves through an oil-water interface, it entrains part of the oil into the water phase through a funnel-shaped volume. New experiments show that the shape of this volume is determined by a combination of potential flow and a starting vortex, but surprisingly, its shape remains independent of the disk velocity.

Porous nematic microfluidics for generation of umbilic defects and umbilic defect lattices

Jure Aplinc, Stephen Morris, and Miha Ravnik

Phys. Rev. Fluids 1, 023303 (2016) - Published 28 June, 2016

Porous nematic microfluidics is shown to produce diverse fluid states –umbilic defect structures- which emerge as the result of backflow coupling between the flow shear and the fluid orientational field. Structures as diverse as square, triangular, rhombic and even Kagome lattices are found.

Lattice-Boltzmann simulation of inertial particle-laden flow around an obstacle

Hamed Haddadi, Shahab Shojaei-Zadeh, and Jeffrey F. Morris

Phys. Rev. Fluids 1, 024201 (2016) - Published 22 June, 2016

The lattice-Boltzmann method is used to compute the flow of a particle suspension around obstacles, with attention given to the flow in the wake. Hydrodynamic interaction between particles in a many-particle suspension is shown to lead to exchange of particles between the wake zone and the free stream.

Reciprocal theorem for convective heat and mass transfer from a particle in Stokes and potential flows

Vahid Vandadi, Saeed Jafari Kang, and Hassan Masoud

Phys. Rev. Fluids 1, 022001(R) (2016) - Published 21 June, 2016

A reciprocal theorem for convective heat and mass transfer offers an alternative approach for calculating integrated quantities such as an average flux from a particle. The results for nonuniform boundary conditions are obtained via solutions of auxiliary problems with constant surface conditions.

Space-time characteristics of wall-pressure and wall shear-stress fluctuations in wall-modeled large eddy simulation

George Ilhwan Park and Parviz Moin

Phys. Rev. Fluids 1, 024404 (2016) - Published 20 June, 2016

Large eddy simulation (LES) for practical engineering computations often requires reduced-order modeling of the near-wall turbulence. A new investigation assesses the capability of wall-modeled LES in predicting the space-time characteristics of wall-pressure and shear-stress fluctuations, which are important in applications including hydroacoustics, aeronautics, and structural vibration.

Influence of spatial exclusion on the statistical behavior of attached eddies

Charitha M. de Silva, James D. Woodcock, Nicholas Hutchins, and Ivan Marusic

Phys. Rev. Fluids 1, 022401(R) (2016) - Published 17 June, 2016

In a model of attached wall eddies, eddies of the same height are, for the first time, kept apart by a minimum distance, resulting in better agreement with experimental observations, in particular for the flatness (kurtosis) of the streamwise velocity fluctuations.

Nonlinear and detuning effects of the nutation angle in precessionally forced rotating cylinder flow

Juan M. Lopez and Francisco Marques

Phys. Rev. Fluids 1, 023602 (2016) - Published 16 June, 2016

The influence of the nutation angle on the precessing cylinder flow is investigated numerically. Three distinct regimes are encountered as the nutation angle is increased. Triadic resonances dominate at low angles, nonlinear interactions between the flow components involved in the resonance dominate at intermediate angles, and for large angles detuning together with stronger nonlinearity lead to chaotic flows dominated by boundary layer separations.

Thermophoresis of confined colloids in the near-contact limit

Ehud Yariv

Phys. Rev. Fluids 1, 022101(R) (2016) - Published 15 June, 2016

The thermophoretic velocity of a colloidal sphere towards a solid boundary due to an imposed temperature gradient perpendicular to that wall is found by a systematic approach to be reduced from the corresponding value in the bulk by a factor 3(h/a)[ln(a/h)+0.1087], in the limit where the particle-wall separation distance h is small compared with particle radius a. This corrects a previous result of 3(h/a)[ln(a/h)-2.25 produced by an ad hoc procedure.

Coherent structures in transitional pipe flow

Leo H. O. Hellström, Bharathram Ganapathisubramani, and Alexander J. Smits

Phys. Rev. Fluids 1, 024403 (2016) - Published 14 June, 2016

Transition to turbulent in a pipe flow is investigated experimentally. The flow is analyzed using proper orthogonal decomposition, and it is found that the flow in the turbulent slugs closely resembles fully developed turbulence, and the flow in the intervening pseudo-laminar regions is governed by azimuthally steady traveling waves.

Hierarchical random additive process and logarithmic scaling of generalized high order, two-point correlations in turbulent boundary layer flow

X. I. A. Yang, I. Marusic, and C. Meneveau

Phys. Rev. Fluids 1, 024402 (2016) - Published 13 June, 2016

A simple model represents Townsend’s attached eddy hypothesis in terms of an array of attached eddies, whose cumulative induction is responsible for the underlying velocity fluctuations in high-Reynolds-number wall turbulence.

Effects of viscoelasticity on drop impact and spreading on a solid surface

Daulet Izbassarov and Metin Muradoglu

Phys. Rev. Fluids 1, 023302 (2016) - Published 10 June, 2016

A model is developed to simulate the anti-rebound effect of the polymeric additives in the drop phase and shown to yield good qualitative agreement with the experimental observations.

Exact solutions and physical analogies for unidirectional flows

Martin Z. Bazant

Phys. Rev. Fluids 1, 024001 (2016) - Published 9 June, 2016

Following Stokes’ “extremely easy” solution for Poiseuille flow in a circular pipe, Saint-Venant solved the analogous problem of beam torsion for arbitrary shapes. This paper explains the mathematics of unidirectional flow and applies it to some new problems, extending the number of analogies to seventeen.

Driving factors of electro-convective instability in concentration polarization

Ramadan Abu-Rjal, Isaak Rubinstein, and Boris Zaltzman

Phys. Rev. Fluids 1, 023601 (2016) - Published 8 June, 2016

A systematic study of the effect of interface perm-selectivity reveals the four principal factors affecting hydrodynamic instability in concentration polarization at nonperfect interfaces.

Investigation of resonances in gravity-capillary wave turbulence

Quentin Aubourg and Nicolas Mordant

Phys. Rev. Fluids 1, 023701 (2016) - Published 7 June, 2016

Experimental observations of the weakly nonlinear coupling of surface gravity waves and capillary waves show this coupling to be predominantly between collinear or nearly collinear waves.

Faraday instability of a two-layer liquid film with a free upper surface

Andrey Pototsky and Michael Bestehorn

Phys. Rev. Fluids 1, 023901 (2016) - Published 7 June, 2016

The classic Faraday instability in a one-layer liquid film is extended to a two-layer film consisting of a lower liquid layer, supported by a vibrating solid plate, overlaid by a second layer of immiscible fluid with a free upper surface. A detailed analytical and numerical analysis of the linear stability of the film, and the interplay between the Faraday and the Rayleigh-Taylor instabilities, is presented.

Simulation of hydrodynamically interacting particles confined by a spherical cavity

Christian Aponte-Rivera and Roseanna N. Zia

Phys. Rev. Fluids 1, 023301 (2016) - Published 6 June, 2016

In order to study diffusion and rheology within a spherical cavity, a theoretical framework is used to model the motion of an arbitrary number of hydrodynamically interacting colloidal particles confined within a solid, continuous spherical cavity. The model accurately accounts for many-body hydrodynamic interactions and lubrication interactions that occur between particles and with the cavity.

Sign In to Your Journals Account

Filter

Recent Issues

Vol. 11, Iss. 11
November 2026
Vol. 11, Iss. 10
October 2026
Vol. 11, Iss. 9
September 2026
Vol. 11, Iss. 8
August 2026
Category
Article Type
Section

Filter

Article Lookup

Enter a citation