Reuse & Permissions

It is not necessary to obtain permission to reuse this article or its components as it is available under the terms of the Creative Commons Attribution 4.0 International license. This license permits unrestricted use, distribution, and reproduction in any medium, provided attribution to the author(s) and the published article's title, journal citation, and DOI are maintained. Please note that some figures may have been included with permission from other third parties. It is your responsibility to obtain the proper permission from the rights holder directly for these figures.

Export citation

Export citation

Choose format for download:

Download Citation
  • Open Access

Ab initio study of structural and electrical properties of SrTiO3 dislocations

Daniel Gueckelhorn1, Marivi Fernández-Serra2,3, Cyrus E. Dreyer2,4, and Andreas Ruediger1,*

  • *Contact author: andreas.ruediger@inrs.ca

Phys. Rev. Materials 10, 113604 – Published 19 November, 2026

DOI: https://doi.org/10.1103/dn2q-6714

Abstract

SrTiO3 is a prototypical perovskite oxide with unique properties that have enabled its use in a wide range of applications, ranging from substrates to photovoltaics. Defects play a key role in the functional properties of SrTiO3. In particular, dislocations, i.e., one-dimensional crystal imperfections, can drastically alter structural and electrical properties in their vicinity. In this work, we present a density functional theory study of the effects of dislocations on SrTiO3. We find that dislocations introduce strong structural distortions with localized strain values reaching 0.17. As a consequence, nonpolar SrTiO3 becomes polar, with polarization values up to 46 µC/cm2, exceeding those of some polar perovskites. Dislocations also interrupt the periodic lattice arrangement, leading to phonon modes between 600cm−1 and 1000cm−1. In terms of electrical properties, dislocations reduce the bandgap by smearing oxygen 2p and titanium 3d states. A Bader charge analysis reveals that free charge carriers accumulate in the heavily distorted regions around the dislocation cores. Overall, the system studied here provides a framework for understanding the key structural and electrical properties of dislocations.

View figure in article

Physics Subject Headings (PhySH)

Article Text

References (57)

  1. D. de Ligny and P. Richet, High-temperature heat capacity and thermal expansion of SrTiO3 and SrZrO3 perovskites, Phys. Rev. B 53, 3013 (1996).
  2. H. Weaver, Dielectric properties of single crystals of SrTiO3 at low temperatures, J. Phys. Chem. Solids 11, 274 (1959).
  3. J. Xu, Z. Zhu, H. Zhao, and Z. Luo, Metal-insulator-transition in SrTiO3 induced by argon bombardment combined with field effect, AIP Adv. 4, 127123 (2014).
  4. M. Wöhlecke, V. Marrello, and A. Onton, Refractive index of BaTiO3 and SrTiO3 films, J. Appl. Phys. 48, 1748 (1977).
  5. J.-F. Ge, Z.-L. Liu, C. Liu, C.-L. Gao, D. Qian, Q.-K. Xue, Y. Liu, and J.-F. Jia, Superconductivity above 100 K in single-layer FeSe films on doped SrTiO3, Nat. Mater. 14, 285 (2015).
  6. J. H. Haeni, P. Irvin, W. Chang, R. Uecker, P. Reiche, Y. L. Li, S. Choudhury, W. Tian, M. E. Hawley, B. Craigo, A. K. Tagantsev, X. Q. Pan, S. K. Streiffer, L. Q. Chen, S. W. Kirchoefer, J. Levy, and D. G. Schlom, Room-temperature ferroelectricity in strained SrTiO3, Nature (London) 430, 758 (2004).
  7. M. Basini, M. Pancaldi, B. Wehinger, M. Udina, V. Unikandanunni, T. Tadano, M. C. Hoffmann, A. V. Balatsky, and S. Bonetti, Terahertz electric-field-driven dynamical multiferroicity in SrTiO3, Nature (London) 628, 534 (2024).
  8. E. B. Guedes, S. Muff, W. H. Brito, M. Caputo, H. Li, N. C. Plumb, J. H. Dil, and M. Radović, Universal structural influence on the 2D electron gas at SrTiO3 surfaces, Adv. Sci. 8, 2100602 (2021).
  9. C. Hou, W. Huang, W. Zhao, D. Zhang, Y. Yin, and X. Li, Ultrahigh energy density in SrTiO3 film capacitors, ACS Appl. Mater. Interfaces 9, 20484 (2017).
  10. S. Wu, L. Ren, J. Qing, F. Yu, K. Yang, M. Yang, Y. Wang, M. Meng, W. Zhou, X. Zhou, and S. Li, Bipolar resistance switching in transparent ITO/LaAlO3/SrTiO3 memristors, ACS Appl. Mater. Interfaces 6, 8575 (2014).
  11. A. Rubano and D. Paparo, Optical second harmonic generation on LaAlO3/SrTiO3 interfaces: A review, Materials 16, 4337 (2023).
  12. H. Lyu, T. Hisatomi, Y. Goto, M. Yoshida, T. Higashi, M. Katayama, T. Takata, T. Minegishi, H. Nishiyama, T. Yamada, Y. Sakata, K. Asakura, and K. Domen, An Al-doped SrTiO3 photocatalyst maintaining sunlight-driven overall water splitting activity for over 1000 h of constant illumination, Chem. Sci. 10, 3196 (2019).
  13. A. Bera, K. Wu, A. Sheikh, E. Alarousu, O. F. Mohammed, and T. Wu, Perovskite oxide SrTiO3 as an efficient electron transporter for hybrid perovskite solar cells, J. Phys. Chem. C 118, 28494 (2014).
  14. W. Sigle, C. Sarbu, D. Brunner, and M. Rühle, Dislocations in plastically deformed SrTiO3, Philos. Mag. 86, 4809 (2006).
  15. K. Szot, W. Speier, R. Carius, U. Zastrow, and W. Beyer, Localized metallic conductivity and self-healing during thermal reduction of SrTiO3, Phys. Rev. Lett. 88, 075508 (2002).
  16. A. H. Youssef, G. Kolhatkar, I. C. Amaechi, R. Katoch, Y. González, A. Merlen, and A. Ruediger, Giant step bunching on SrTiO3 thin films grown epitaxially on vicinal MgO (100) surfaces, Appl. Surf. Sci. 570, 151266 (2021).
  17. L. Porz, A. J. Klomp, X. Fang, N. Li, C. Yildirim, C. Detlefs, E. Bruder, M. Höfling, W. Rheinheimer, E. A. Patterson, P. Gao, K. Durst, A. Nakamura, K. Albe, H. Simons, and J. Rödel, Dislocation-toughened ceramics, Mater. Horiz. 8, 1528 (2021).
  18. H. Chen, D. Yi, B. Xu, J. Ma, and C. Nan, Spontaneous symmetry breaking of dislocation core in SrTiO3, Mater. Today Phys. 20, 100453 (2021).
  19. P. Zubko, G. Catalan, A. Buckley, P. R. L. Welche, and J. F. Scott, Strain-gradient-induced polarization in SrTiO3 single crystals, Phys. Rev. Lett. 99, 167601 (2007).
  20. K. Szot, W. Speier, G. Bihlmayer, and R. Waser, Switching the electrical resistance of individual dislocations in single-crystalline SrTiO3, Nat. Mater. 5, 312 (2006).
  21. K. Szot, C. Rodenbücher, K. Rogacki, G. Bihlmayer, W. Speier, K. Roleder, F. Krok, H. Keller, A. Simon, and A. Bussmann-Holder, Transition to metallic and superconducting states induced by thermal or electrical deoxidation of the dislocation network in the surface region of SrTiO3, Nanomaterials 14, 1944 (2024).
  22. L. L. Rusevich, M. Tyunina, E. A. Kotomin, N. Nepomniashchaia, and A. Dejneka, The electronic properties of SrTiO3−δ with oxygen vacancies or substitutions, Sci. Rep. 11, 23341 (2021).
  23. X. Ran, Y. Bai, H. Zeng, J. Zhang, H. Fu, X. An, and X. Yang, Manipulating oxygen vacancy in SrTiO3 nanoparticles to achieve enhanced photoelectrochemical performance in water splitting, ACS Appl. Nano Mater. 7, 27543 (2024).
  24. D. A. Tenne, I. E. Gonenli, A. Soukiassian, D. G. Schlom, S. M. Nakhmanson, K. M. Rabe, and X. X. Xi, Raman study of oxygen reduced and re-oxidized strontium titanate, Phys. Rev. B 76, 024303 (2007).
  25. D. Marrocchelli, L. Sun, and B. Yildiz, Dislocations in SrTiO3: Easy to reduce but not so fast for oxygen transport, J. Am. Chem. Soc. 137, 4735 (2015).
  26. C. Rodenbücher, S. Menzel, D. Wrana, T. Gensch, C. Korte, F. Krok, and K. Szot, Current channeling along extended defects during electroreduction of SrTiO3, Sci. Rep. 9, 2502 (2019).
  27. J. Rakowsky and P. P. Dholabhai, Interface layer chemistry dependent oxygen defect formation in BaZrO3(110)/SrTiO3(100) heterostructures, Energy Adv. 5, 43 (2026).
  28. R. A. De Souza, Transport properties of dislocations in SrTiO3 and other perovskites, Curr. Opin. Solid State Mater. Sci. 25, 100923 (2021).
  29. S. P. Waldow and R. A. De Souza, Computational study of oxygen diffusion along a[100] dislocations in the perovskite oxide SrTiO3, ACS Appl. Mater. Interfaces 8, 12246 (2016).
  30. W. Ebmeyer, P. Hatton, B. P. Uberuaga, and P. P. Dholabhai, Influence of misfit dislocations on ionic conductivity at oxide interfaces, J. Mater. Chem. A 12, 21252 (2024).
  31. H. Sha, Y. Ma, G. Cao, J. Cui, W. Yang, Q. Li, and R. Yu, Sub-nanometer-scale mapping of crystal orientation and depth-dependent structure of dislocation cores in SrTiO3, Nat. Commun. 14, 162 (2023).
  32. P. Gao, S. Yang, R. Ishikawa, N. Li, B. Feng, A. Kumamoto, N. Shibata, P. Yu, and Y. Ikuhara, Atomic-scale measurement of flexoelectric polarization at SrTiO3 dislocations, Phys. Rev. Lett. 120, 267601 (2018).
  33. M.-W. Chu, I. Szafraniak, R. Scholz, C. Harnagea, D. Hesse, M. Alexe, and U. Gösele, Impact of misfit dislocations on the polarization instability of epitaxial nanostructured ferroelectric perovskites, Nat. Mater. 3, 87 (2004).
  34. T. Sumigawa, T. Shimada, K. Huang, Y. Mizuno, Y. Hagiwara, N. Ozaki, and T. Kitamura, Ultrasmall-scale brittle fracture initiated from a dislocation in SrTiO3, Nano Lett. 22, 2077 (2022).
  35. V. Nagarajan, C. L. Jia, H. Kohlstedt, R. Waser, I. B. Misirlioglu, S. P. Alpay, and R. Ramesh, Misfit dislocations in nanoscale ferroelectric heterostructures, Appl. Phys. Lett. 86, 192910 (2005).
  36. C. Rodenbücher, G. Bihlmayer, C. Korte, and K. Szot, Gliding of conducting dislocations in SrTiO3 at room temperature: Why oxygen vacancies are strongly bound to the cores of dislocations, APL Mater. 11, 021108 (2023).
  37. X. Cheng, B. Wang, and L.-Q. Chen, Polarization near dislocation cores in SrTiO3 single crystals: The role of flexoelectricity, Appl. Phys. Lett. 124, 132905 (2024).
  38. M. L. D. Reis, P. Carrez, and P. Cordier, Interaction between dislocation and vacancies in magnesium oxide: Insights from atomistic simulations and elasticity theory, Phys. Rev. Mater. 5, 063602 (2021).
  39. M. K. Nowotny, T. Bak, and J. Nowotny, Electrical properties and defect chemistry of TiO2 single crystal. I. Electrical conductivity, J. Phys. Chem. B 110, 16270 (2006).
  40. K. Otsuka, K. Matsunaga, A. Nakamura, S. Ii, A. Kuwabara, T. Yamamoto, and Y. Ikuhara, Effects of dislocations on the oxygen ionic conduction in yttria stabilized zirconia, Mater. Trans. 45, 2042 (2004).
  41. L. Sun, D. Marrocchelli, and B. Yildiz, Edge dislocation slows down oxide ion diffusion in doped CeO2 by segregation of charged defects, Nat. Commun. 6, 6294 (2015).
  42. J. M. Soler, E. Artacho, J. D. Gale, A. García, J. Junquera, P. Ordejón, and D. Sánchez-Portal, The SIESTA method for ab initio order-N materials simulation, J. Phys.: Condens. Matter 14, 2745 (2002).
  43. J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized gradient approximation made simple, Phys. Rev. Lett. 77, 3865 (1996).
  44. M. J. van Setten, M. Giantomassi, E. Bousquet, M. J. Verstraete, D. R. Hamann, X. Gonze, and G.-M. Rignanese, The PseudoDojo: Training and grading a 85 element optimized norm-conserving pseudopotential table, Comput. Phys. Commun. 226, 39 (2018).
  45. H. J. Monkhorst and J. D. Pack, Special points for Brillouin-zone integrations, Phys. Rev. B 13, 5188 (1976).
  46. V. Sharma, B. Bein, A. Lai, B. Pamuk, C. E. Dreyer, M. Fernández-Serra, and M. Dawber, Cooperative interactions between surface terminations explain photocatalytic water splitting activity on SrTiO3, PRX Energy 1, 023002 (2022).
  47. C. Ricca, I. Timrov, M. Cococcioni, N. Marzari, and U. Aschauer, Self-consistent DFT + U + V study of oxygen vacancies in SrTiO3, Phys. Rev. Res. 2, 023313 (2020).
  48. M. Schmidbauer, A. Kwasniewski, and J. Schwarzkopf, High-precision absolute lattice parameter determination of SrTiO3, DyScO3 and NdGaO3 single crystals, Acta Cryst. B 68, 8 (2012).
  49. S. F. Yuk, I. Sargin, N. Meyer, J. T. Krogel, S. P. Beckman, and V. R. Cooper, Putting error bars on density functional theory, Sci. Rep. 14, 20219 (2024).
  50. K. Robinson, G. V. Gibbs, and P. H. Ribbe, Quadratic elongation: A quantitative measure of distortion in coordination polyhedra, Science 172, 567 (1971).
  51. K. M. Rabe, M. Dawber, C. Lichtensteiger, C. H. Ahn, and J.-M. Triscone, Modern physics of ferroelectrics: Essential background, Physics of Ferroelectrics, Topics in Applied Physics Vol. 105 (Springer, Berlin, Heidelberg, 2007), pp. 1–30.
  52. V. Buscaglia, M. T. Buscaglia, and G. Canu, BaTiO3-based ceramics: Fundamentals, properties and applications, Encyclopedia of Materials: Technical Ceramics and Glasses (Elsevier, 2021), pp. 311–344.
  53. G. Verbist, F. M. Peeters, and J. T. Devreese, Extended stability region for large bipolarons through interaction with multiple phonon branches, Ferroelectrics 130, 27 (1992).
  54. K. van Benthem, C. Elsässer, and R. H. French, Bulk electronic structure of SrTiO3: Experiment and theory, J. Appl. Phys. 90, 6156 (2001).
  55. I. Derkaoui, M. Achehboune, R. I. Eglitis, A. I. Popov, I. Boukhoubza, M. A. B.-M. Kabatas, and A. Rezzouk, Influence of the Hubbard U correction on the electronic properties and chemical bands of the cubic (Pm3¯m) phase of SrTiO3 using GGA/PBE and LDA/CA-PZ approximations, Molecules 29, 3081 (2024).
  56. S. G. Mayo, F. Yndurain, and J. M. Soler, Band unfolding made simple, J. Phys.: Condens. Matter 32, 205902 (2020).
  57. J. Park, S. Huh, Y. W. Choi, D. Kang, M. Kim, D. Kim, S. Park, H. J. Choi, C. Kim, and Y. Yi, Visualizing the low-energy electronic structure of prototypical hybrid halide perovskite through clear band measurements, ACS Nano 18, 7570 (2024).

Outline

Information

Sign In to Your Journals Account

Filter

Filter

Article Lookup

Enter a citation