- Open Access
Comprehensive Darcy-type law for viscoplastic fluids: Rheology and topology
Phys. Rev. Fluids 11, 113302 – Published 16 November, 2026
DOI: https://doi.org/10.1103/p9jk-q2kp
Abstract
We extend our recently proposed framework [Chaparian, Phys. Rev. Fluids 10, 093301 (2025)] for deriving a Darcy-type law governing viscoplastic flows through porous media to incorporate more applied aspects. In particular, the present work considers a more realistic rheological model (i.e., Herschel-Bulkley, describing the shear-thinning nature of practical yield-stress fluids) along with a wider range of porous media topologies. In our earlier work, the problem was addressed by decomposing the full Bingham number spectrum (representing the ratio of the yield stress of the fluid to the characteristic viscous stress) into three main regions: (i) low Bingham numbers (weak yield stress limit) corresponding to Newtonian flow, (ii) high Bingham numbers (strong yield stress limit) representing yield limit/plastic flow, and (iii) intermediate Bingham numbers (transition regime). By deriving theoretical models for the two asymptotic limits of the spectrum and combining them, we obtained a Darcy-type law applicable across the entire range of Bingham numbers. In contrast to our original work, where the weak yield stress limit reduces to a Newtonian flow, here this limit instead follows a power-law asymptote that captures the shear-thinning dominated behavior of Herschel-Bulkley fluids. In the present study, we derive a scaling to address this limit. The framework is further generalized to incorporate a broader spectrum of porous media topologies, enabling a systematic assessment of how pore geometry influences the resulting macroscopic flow law. The proposed framework provides a unified theoretical basis for predicting yield-stress fluid transport through complex porous media and establishes a pathway toward finding macroscopic models applicable to a wide range of natural systems and industrial processes.
Physics Subject Headings (PhySH)
Article Text
References (34)
- I. A. Frigaard, K. G. Paso, and P. R. de Souza Mendes, Bingham's model in the oil and gas industry, Rheol. Acta 56, 259 (2017).
- Z. Zhou, H. Zang, S. Wang, X. Du, D. Ma, and J. Zhang, Filtration behaviour of cement-based grout in porous media, Transp. Porous Media 125, 435 (2018).
- A. Skauge, N. Zamani, J. Gausdal Jacobsen, B. S. Shiran, B. Al-Shakry, and T. Skauge, Polymer flow in porous media: Relevance to enhanced oil recovery, Colloids Interfaces 2, 27 (2018).
- J. F. Keating, C. L. Hajducka, and J. Harper, Minimal internal fixation and calcium-phosphate cement in the treatment of fractures of the tibial plateau: A pilot study, J. Bone Joint Surg. Br. 85-B, 68 (2003).
- S. D. C. Walsh and M. O. Saar, Magma yield stress and permeability: Insights from multiphase percolation theory, J. Volcanol. Geotherm. Res. 177, 1011 (2008).
- G. Gustafson and H. Stille, Prediction of groutability from grout properties and hydrogeological data, Tunn. Undergr. Space Tech. 11, 325 (1996).
- D. V. Boger, Rheology of slurries and environmental impacts in the mining industry, Annu. Rev. Chem. Biomol. Eng. 4, 239 (2013).
- P. Coussot, Rheometry of Pastes, Suspensions, and Granular Materials: Applications in Industry and Environment (John Wiley & Sons, New York, 2005).
- E. Chaparian, Comprehensive Darcy-type law for viscoplastic fluids: Framework, Phys. Rev. Fluids 10, 093301 (2025).
- T. Al-Fariss and K. L. Pinder, Flow through porous media of a shear-thinning liquid with yield stress, Can. J. Chem. Eng. 65, 391 (1987).
- L. Talon and D. Bauer, On the determination of a generalized Darcy equation for yield-stress fluid in porous media using a Lattice-Boltzmann TRT scheme, Eur. Phys. J. E 36, 139 (2013).
- S. Shahsavari and G. H. McKinley, Mobility and pore-scale fluid dynamics of rate-dependent yield-stress fluids flowing through fibrous porous media, J. Non-Newtonian Fluid Mech. 235, 76 (2016).
- D. Bauer, L. Talon, Y. Peysson, H. B. Ly, G. Batôt, T. Chevalier, and M. Fleury, Experimental and numerical determination of Darcy's law for yield stress fluids in porous media, Phys. Rev. Fluids 4, 063301 (2019).
- P. Ponte Castañeda, Variational linear comparison homogenization estimates for the flow of yield stress fluids through porous media, J. Non-Newtonian Fluid Mech. 321, 105104 (2023).
- E. Chaparian, Yielding to percolation: A universal scale, J. Fluid Mech. 980, A14 (2024).
- E. Chaparian and I. A. Frigaard, Yield limit analysis of particle motion in ayield-stress fluid, J. Fluid Mech. 819, 311 (2017).
- I. A. Frigaard, Background lectures on ideal visco-plastic fluid flows, in Lectures on Visco-Plastic Fluid Mechanics (Springer, Berlin, 2019), pp. 1–40.
- E. Chaparian, D. Izbassarov, F. De Vita, L. Brandt, and O. Tammisola, Yield-stress fluids in porous media: A comparison of viscoplastic and elastoviscoplastic flows, Meccanica 55, 331 (2020).
- J. A. Iglesias, G. Mercier, E. Chaparian, and I. A. Frigaard, Computing the yield limit in three-dimensional flows of a yield stress fluid about a settling particle, J. Non-Newtonian Fluid Mech. 284, 104374 (2020).
- E. Chaparian and O. Tammisola, Sliding flows of yield-stress fluids, J. Fluid Mech. 911, A17 (2021).
- I. A. Frigaard, U = 0? J. Non-Newtonian Fluid Mech. 347, 105530 (2026).
- C. U. Ikoku and H. J. Ramey Jr., Transient flow of non-Newtonian power-law fluids in porous media, Soc. Pet. Eng. J. 19, 164 (1979).
- A. S. Odeh and H. T. Yang, Flow of non-Newtonian power-law fluids through porous media, Soc. Pet. Eng. J. 19, 155 (1979).
- C. B. Shah and Y. C. Yortsos, Aspects of flow of power-law fluids in porous media, AIChE J. 41, 1099 (1995).
- S. Shahsavari and G. H. McKinley, Mobility of power-law and Carreau fluids through fibrous media, Phys. Rev. E 92, 063012 (2015).
- D. Fraggedakis, E. Chaparian, and O. Tammisola, The first open channel for yield-stress fluids in porous media, J. Fluid Mech. 911, A58 (2021).
- N. Roquet and P. Saramito, An adaptive finite element method for Bingham fluid flows around a cylinder, Comput. Methods Appl. Mech. Eng. 192, 3317 (2003).
- R. R. Huilgol and Z. You, Application of the augmented Lagrangian method to steady pipe flows of Bingham, Casson and Herschel–Bulkley fluids, J. Non-Newtonian Fluid Mech. 128, 126 (2005).
- E. Chaparian and O. Tammisola, An adaptive finite element method for elastoviscoplastic fluid flows, J. Non-Newtonian Fluid Mech. 271, 104148 (2019).
- F. Hecht, New development in FreeFEM, J. Numer. Math. 20, 251 (2012).
- E. Chaparian, C. E. Owens, and G. H. McKinley, Computational rheometry of yielding and viscoplastic flow in vane-and-cup rheometer fixtures, J. Non-Newtonian Fluid Mech. 307, 104857 (2022).
- E. F. Medina-Bañuelos, B. M. Marín-Santibáñez, E. Chaparian, C. E. Owens, G. H. McKinley, and J. Pérez-González, Rheo-PIV of yield-stress fluids in a 3D-printed fractal vane-in-cup geometry, J. Rheol. 67, 891 (2023).
- S. Parvar, E. Chaparian, and O. Tammisola, General hydrodynamic features of elastoviscoplastic fluid flows through randomized porous media, Theor. Comput. Fluid Dyn. 38, 531 (2024).
- J. E. Drummond and M. I. Tahir, Laminar viscous flow through regular arrays of parallel solid cylinders, Int. J. Multiphase Flow 10, 515 (1984).