Export citation

Export citation

Choose format for download:

Download Citation
  • Editors' Suggestion

Experiments on rapidly rotating convection: The role of the Prandtl number

Hannah M. Clercx* and Rudie P. J. Kunnen†

  • Fluids and Flows Group and J.M. Burgers Center for Fluid Mechanics, Department of Applied Physics and Science Education, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, The Netherlands

  • *Present address: Environmental Fluid Mechanics group at Faculty of Civil Engineering, Delft University of Technology, P.O. Box 5, 2600 AA Delft, The Netherlands.
  • †Contact author: r.p.j.kunnen@tue.nl

Phys. Rev. Fluids 10, 123503 – Published 26 December, 2025

DOI: https://doi.org/10.1103/n66p-zhpw

Abstract

Flows at planetary scales are generally driven by buoyancy and influenced by rotation. Rotating Rayleigh-Bénard convection (RRBC) is a practical and simple model that can be used to describe these systems. In RRBC, thermally induced convection occurs, which is influenced by the constant rotation it experiences. We study RRBC in a cylinder in the transition region between rotation-affected and rotation-dominated (also called geostrophic) convection. Experiments are performed to assess the dependence of the Nusselt number Nu (efficiency of convective heat transfer) on the Prandtl number Pr (ratio of kinematic viscosity over thermal diffusivity), a relation that is not explored much for geostrophic convection. By using water at different mean temperatures we can reach 2.8≤Pr≤6. We study the relation between Pr and Nu at constant Ekman number Ek=3×10−7 (an inverse measure for strength of rotation) for two different diameter-to-height aspect ratios (Γ=1/5 and 1/2) of the setup. The corresponding constant Rayleigh numbers (strength of thermal forcing) are Ra=1.1×1012 and 1×1011, respectively. Additionally, we measure the relation between the Rayleigh number Ra and Nu for 4×1010≤Ra≤7×1011, Ek=3×10−7, and Pr=3.7. It is found that Nu exhibits a significant dependence on Pr, even within this limited range. Increasing Pr by a factor 2 resulted in a decrease of Nu of about 25%. We hypothesize that the decrease of Nu is caused by the changing ratio of the thermal and kinetic boundary layer thicknesses as a result of increasing Pr. We also consider the anticipated contributions of the wall mode to the heat transfer using sidewall temperature measurements.

Physics Subject Headings (PhySH)

Authorization Required

We need you to provide your credentials before accessing this content.

References (Subscription Required)

Outline

Information

Sign In to Your Journals Account

Filter

Filter

Article Lookup

Enter a citation