- Accepted Paper
X-ray conversion efficiency of laser-driven solid plastic capsules
Phys. Rev. E - Accepted 28 July, 2026
DOI: https://doi.org/10.1103/n758-bn6r
Phys. Rev. E - Accepted 28 July, 2026
DOI: https://doi.org/10.1103/n758-bn6r
A fundamental process in laser-produced high energy density (HED) plasma is conversion of internal energy into x-rays due to bremsstrahlung and recombination. In inertial confinement fusion (ICF), accurately accounting for all energy loss pathways, including radiation, is essential for predictive modeling. The radiation emitted in an ICF implosion is dependent on the composition, temperature, and density of the laser-produced conduction zone plasma. Solid, plastic (CH) spheres were symmetrically irradiated on the 30-kJ, 351-nm, 60-beam OMEGA laser system [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] and the time-resolved x-ray signals emitted in the 50 to 5500 eV range were recorded with Dante [C. Sorce et al., Rev. Sci. Instrum. 77, 10E518 (2006)], an absolutely calibrated filtered x-ray diode array, and compared to 1-D radiation-hydrodynamics simulations. The simulations reproduce the total x-ray flux to within the known measurement errors using both flux-limited and non-local thermal transport. Simulations underestimate emission in certain spectral ranges, which can be explained by oxygen contamination of the plastic and emission from the silicon nitride stalk. The conversion efficiency of laser power to x-ray radiated power was measured for drive intensities in the to W/cm range, and agree with predictions. The peak conversion efficiency varies inversely with peak laser intensity from 6% at W/cm to 3% at W/cm.
If the author has provided any supplemental materials with this article they will be available upon publication of the version of record.