- Physical Review Journals
All JournalsPhysics Magazine

Physical Review Research

Reuse & Permissions

It is not necessary to obtain permission to reuse this article or its components as it is available under the terms of the Creative Commons Attribution 4.0 International license. This license permits unrestricted use, distribution, and reproduction in any medium, provided attribution to the author(s) and the published article's title, journal citation, and DOI are maintained. Please note that some figures may have been included with permission from other third parties. It is your responsibility to obtain the proper permission from the rights holder directly for these figures.

Export citation

Export citation

Choose format for download:

Download Citation
  • Open Access

Phase-field model of alloy solidification far from chemical equilibrium at the solid-liquid interface

Kaihua Ji1,2, Mingwang Zhong1, and Alain Karma1,*

  • *Contact author: a.karma@northeastern.edu
PDF

Phys. Rev. Research 7, 033128 – Published 6 August, 2025

DOI: https://doi.org/10.1103/vyd6-nj4h

Abstract

We further develop a recently introduced phase-field model of far-from-equilibrium alloy solidification under additive manufacturing conditions [K. Ji et al., Phys. Rev. Lett. 130, 026203 (2023)]. This model utilizes enhanced solute diffusivity within the spatially diffuse interface region to quantitatively capture solute trapping with a larger interface width, thereby making simulations on experimentally relevant length and timescales computationally feasible. The main developments presented here include testing the robustness of different variational formulations, extending the model to concentrated alloys by incorporating solid and liquid free energies from thermodynamic databases, as illustrated for hypoeutectic Al-Ag alloys with CALPHAD, extending convergence tests as a function of interface width to 3D, and carrying out simulations in both 2D and 3D to examine existing theories of microstructure development. Our results indicate that the simplest variational formulation that interpolates the bulk free-energy density between its solid and liquid forms is the most robust. Remarkably, for hypoeutectic Al-Ag alloys, this formulation yields a high-velocity nonequilibrium phase diagram that is independent of interface width, thereby demonstrating that the framework of enhanced solute diffusivity can be nontrivially extended to concentrated alloys. Other variational formulations have restricted ranges of materials or processing parameters that can be reliably modeled. We use 2D simulations to construct high-velocity microstructure selection maps for dilute Al-Cu alloys. The results validate the important role of latent heat rejection at the interface and extend the limited predictions of linear stability analysis [A. Karma and A. Sarkissian, Phys. Rev. E 47, 513 (1993)] and sharp-interface 1D simulations to fully nonlinear regimes. Furthermore, 3D simulations, carried out using a computationally tractable axisymmetric cellular/dendritic interface shape, demonstrate a good convergence similar to that observed in 2D as a function of interface width. Full 3D simulations, in turn, reveal that the standard theory of absolute stability is a good predictor of the upper critical velocity beyond which steady-state growth becomes unstable, despite the different morphological manifestations of this instability in 2D and 3D.

View figure in article

Physics Subject Headings (PhySH)

Article Text

Supplemental Material

References (73)

  1. W. Kurz and D. J. Fisher, Fundamentals of Solidification (Trans Tech Publications, Aedermannsdorf, 1989).
  2. J. A. Dantzig and M. Rappaz, Solidification (EPFL Press, Lausanne, 2016).
  3. W. J. Boettinger, J. A. Warren, C. Beckermann, and A. Karma, Phase-field simulation of solidification, Annu. Rev. Mater. Sci. 32, 163 (2002).
  4. I. Steinbach, Phase-field models in materials science, Modell. Simul. Mater. Sci. Eng. 17, 073001 (2009).
  5. A. Karma and D. Tourret, Atomistic to continuum modeling of solidification microstructures, Curr. Opin. Solid State Mater. Sci. 20, 25 (2016).
  6. W. Kurz, M. Rappaz, and R. Trivedi, Progress in modelling solidification microstructures in metals and alloys. Part II: Dendrites from 2001 to 2018, Int. Mater. Rev. 66, 30 (2021).
  7. D. Tourret, H. Liu, and J. LLorca, Phase-field modeling of microstructure evolution: Recent applications, perspectives and challenges, Prog. Mater. Sci. 123, 100810 (2022).
  8. T. Haxhimali, A. Karma, F. Gonzales, and M. Rappaz, Orientation selection in dendritic evolution, Nat. Mater. 5, 660 (2006).
  9. J. A. Dantzig, P. Di Napoli, J. Friedli, and M. Rappaz, Dendritic growth morphologies in Al-Zn alloys—Part II: Phase-field computations, Metall. Mater. Trans. A 44, 5532 (2013).
  10. N. Bergeon, D. Tourret, L. Chen, J.-M. Debierre, R. Guérin, A. Ramirez, B. Billia, A. Karma, and R. Trivedi, Spatiotemporal dynamics of oscillatory cellular patterns in three-dimensional directional solidification, Phys. Rev. Lett. 110, 226102 (2013).
  11. A. Clarke, D. Tourret, Y. Song, S. Imhoff, P. Gibbs, J. Gibbs, K. Fezzaa, and A. Karma, Microstructure selection in thin-sample directional solidification of an Al-Cu alloy: In situ x-ray imaging and phase-field simulations, Acta Mater. 129, 203 (2017).
  12. Y. Song, D. Tourret, F. L. Mota, J. Pereda, B. Billia, N. Bergeon, R. Trivedi, and A. Karma, Thermal-field effects on interface dynamics and microstructure selection during alloy directional solidification, Acta Mater. 150, 139 (2018).
  13. K. Wang, G. Boussinot, C. Hüter, E. A. Brener, and R. Spatschek, Modeling of dendritic growth using a quantitative nondiagonal phase field model, Phys. Rev. Mater. 4, 033802 (2020).
  14. F. L. Mota, K. Ji, L. S. Littles, R. Trivedi, A. Karma, and N. Bergeon, Influence of macroscopic interface curvature on dendritic patterns during directional solidification of bulk samples: Experimental and phase-field studies, Acta Mater. 250, 118849 (2023).
  15. Y. Song, F. L. Mota, D. Tourret, K. Ji, B. Billia, R. Trivedi, N. Bergeon, and A. Karma, Cell invasion during competitive growth of polycrystalline solidification patterns, Nat. Commun. 14, 2244 (2023).
  16. A. Karma and W.-J. Rappel, Quantitative phase-field modeling of dendritic growth in two and three dimensions, Phys. Rev. E 57, 4323 (1998).
  17. A. Karma, Phase-field formulation for quantitative modeling of alloy solidification, Phys. Rev. Lett. 87, 115701 (2001).
  18. B. Echebarria, R. Folch, A. Karma, and M. Plapp, Quantitative phase-field model of alloy solidification, Phys. Rev. E 70, 061604 (2004).
  19. R. Folch and M. Plapp, Quantitative phase-field modeling of two-phase growth, Phys. Rev. E 72, 011602 (2005).
  20. M. Plapp, Unified derivation of phase-field models for alloy solidification from a grand-potential functional, Phys. Rev. E 84, 031601 (2011).
  21. G. Boussinot and E. A. Brener, Achieving realistic interface kinetics in phase-field models with a diffusional contrast, Phys. Rev. E 89, 060402 (2014).
  22. J. T. McKeown, K. Zweiacker, C. Liu, D. R. Coughlin, A. J. Clarke, J. K. Baldwin, J. W. Gibbs, J. D. Roehling, S. D. Imhoff, P. J. Gibbs, D. Tourret, J. M. Wiezorek, and G. H. Campbell, Time-resolved in situ measurements during rapid alloy solidification: experimental insight for additive manufacturing, JOM 68, 985 (2016).
  23. K. Ji, E. Dorari, A. J. Clarke, and A. Karma, Microstructural pattern formation during far-from-equilibrium alloy solidification, Phys. Rev. Lett. 130, 026203 (2023).
  24. M. J. Aziz, Interface attachment kinetics in alloy solidification, Metall. Mater. Trans. A 27, 671 (1996).
  25. W. W. Mullins and R. F. Sekerka, Stability of a planar interface during solidification of a dilute binary alloy, J. Appl. Phys. 35, 444 (1964).
  26. R. Trivedi and W. Kurz, Morphological stability of a planar interface under rapid solidification conditions, Acta Metall. 34, 1663 (1986).
  27. A. Ludwig and W. Kurz, Direct observation of solidification microstructures around absolute stability, Acta Mater. 44, 3643 (1996).
  28. W. J. Boettinger and J. A. Warren, Simulation of the cell to plane front transition during directional solidification at high velocity, J. Cryst. Growth 200, 583 (1999).
  29. W. J. Boettinger, D. Shechtman, R. J. Schaefer, and F. S. Biancaniello, The effect of rapid solidification velocity on the microstructure of Ag-Cu alloys, Metall. Trans. A 15, 55 (1984).
  30. M. Zimmermann, M. Carrard, M. Gremaud, and W. Kurz, Characterization of the banded structure in rapidly solidified Al-Cu alloys, Mater. Sci. Eng., A 134, 1278 (1991).
  31. M. Gremaud, M. Carrard, and W. Kurz, Banding phenomena in Al-Fe alloys subjected to laser surface treatment, Acta Metall. Mater. 39, 1431 (1991).
  32. M. Carrard, M. Gremaud, M. Zimmermann, and W. Kurz, About the banded structure in rapidly solidified dendritic and eutectic alloys, Acta Metall. Mater. 40, 983 (1992).
  33. S. C. Gill and W. Kurz, Rapidly solidified Al-Cu alloys—I. Experimental determination of the microstructure selection map, Acta Metall. Mater. 41, 3563 (1993).
  34. S. C. Gill and W. Kurz, Rapidly solidified Al-Cu alloys—II. Calculation of the microstructure selection map, Acta Metall. Mater. 43, 139 (1995).
  35. M. Gremaud, M. Carrard, and W. Kurz, The microstructure of rapidly solidified Al-Fe alloys subjected to laser surface treatment, Acta Metall. Mater. 38, 2587 (1990).
  36. W. Kurz and R. Trivedi, Banded solidification microstructures, Metall. Mater. Trans. A 27, 625 (1996).
  37. J. T. McKeown, A. K. Kulovits, C. Liu, K. Zweiacker, B. W. Reed, T. Lagrange, J. M. Wiezorek, and G. H. Campbell, In situ transmission electron microscopy of crystal growth-mode transitions during rapid solidification of a hypoeutectic Al–Cu alloy, Acta Mater. 65, 56 (2014).
  38. S. R. Coriell and R. F. Sekerka, Oscillatory morphological instabilities due to non-equilibrium segregation, J. Cryst. Growth 61, 499 (1983).
  39. G. J. Merchant and S. H. Davis, Morphological instability in rapid directional solidification, Acta Metall. Mater. 38, 2683 (1990).
  40. A. Karma and A. Sarkissian, Interface dynamics and banding in rapid solidification, Phys. Rev. E 47, 513 (1993).
  41. A. Karma and A. Sarkissian, Dynamics of banded structure formation in rapid solidification, Phys. Rev. Lett. 68, 2616 (1992).
  42. N. A. Ahmad, A. A. Wheeler, W. J. Boettinger, and G. B. McFadden, Solute trapping and solute drag in a phase-field model of rapid solidification, Phys. Rev. E 58, 3436 (1998).
  43. A. Karma, Phase-field models of microstructural pattern formation, in Thermodynamics, Microstructures and Plasticity, edited by A. Finel, D. Mazière, and M. Veron (Springer, Dordrecht, 2003), pp. 65–89.
  44. D. Danilov and B. Nestler, Phase-field modelling of solute trapping during rapid solidification of a Si–As alloy, Acta Mater. 54, 4659 (2006).
  45. P. K. Galenko, E. V. Abramova, D. Jou, D. A. Danilov, V. G. Lebedev, and D. M. Herlach, Solute trapping in rapid solidification of a binary dilute system: A phase-field study, Phys. Rev. E 84, 041143 (2011).
  46. I. Steinbach, L. Zhang, and M. Plapp, Phase-field model with finite interface dissipation, Acta Mater. 60, 2689 (2012).
  47. T. Pinomaa and N. Provatas, Quantitative phase field modeling of solute trapping and continuous growth kinetics in quasi-rapid solidification, Acta Mater. 168, 167 (2019).
  48. K. Ji, A. J. Clarke, J. T. McKeown, and A. Karma, Microstructure development during rapid alloy solidification, MRS Bull. 49, 556 (2024).
  49. D. Tourret, R. Tavakoli, A. Boccardo, A. K. Boukellal, M. Li, and J. M. Molina-Aldareguía, Emergence of rapid solidification microstructure in additive manufacturing of a magnesium alloy, Modell. Simul. Mater. Sci. Eng. 32, 055012 (2024).
  50. Y. Li, L. Wang, Z. Wang, J. Li, and J. Wang, A phase-field model bridging near-equilibrium and far-from-equilibrium alloy solidification, Acta Mater. 284, 120596 (2025).
  51. M. J. Aziz, model for solute redistribution during rapid solidification, J. Appl. Phys. 53, 1158 (1982).
  52. S. G. Kim, W. T. Kim, and T. Suzuki, Phase-field model for binary alloys, Phys. Rev. E 60, 7186 (1999).
  53. A. A. Wheeler, W. J. Boettinger, and G. B. McFadden, Phase-field model for isothermal phase transitions in binary alloys, Phys. Rev. A 45, 7424 (1992).
  54. J. A. Warren and W. J. Boettinger, Prediction of dendritic growth and microsegregation patterns in a binary alloy using the phase-field method, Acta Metall. Mater. 43, 689 (1995).
  55. M. J. Aziz and T. Kaplan, Continuous growth model for interface motion during alloy solidification, Acta Metall. 36, 2335 (1988).
  56. M. J. Aziz and W. J. Boettinger, On the transition from short-range diffusion-limited to collision-limited growth in alloy solidification, Acta Metall. Mater. 42, 527 (1994).
  57. V. Witusiewicz, U. Hecht, S. Fries, and S. Rex, The Ag–Al–Cu system: Part I: Reassessment of the constituent binaries on the basis of new experimental data, J. Alloys Compd. 385, 133 (2004).
  58. J. H. Lee, S. Liu, H. Miyahara, and R. Trivedi, Diffusion-coefficient measurements in liquid metallic alloys, Metall. Mater. Trans. B 35, 909 (2004).
  59. M. Gündüz and J. D. Hunt, The measurement of solid-liquid surface energies in the Al-Cu, Al-Si and Pb-Sn systems, Acta Metall. 33, 1651 (1985).
  60. M. I. Mendelev, M. J. Rahman, J. J. Hoyt, and M. Asta, Molecular-dynamics study of solid–liquid interface migration in fcc metals, Modell. Simul. Mater. Sci. Eng. 18, 074002 (2010).
  61. Y. Yang, H. Humadi, D. Buta, B. B. Laird, D. Sun, J. J. Hoyt, and M. Asta, Atomistic simulations of nonequilibrium crystal-growth kinetics from alloy melts, Phys. Rev. Lett. 107, 025505 (2011).
  62. S. Kavousi, B. R. Novak, J. Hoyt, and D. Moldovan, Interface kinetics of rapid solidification of binary alloys by atomistic simulations: Application to Ti-Ni alloys, Comput. Mater. Sci. 184, 109854 (2020).
  63. E. A. Antillon, C. A. Hareland, and P. W. Voorhees, Solute trapping and solute drag during nonequilibrium solidification of Fe–Cr alloys, Acta Mater. 248, 118769 (2023).
  64. K. Ji, A. M. Tabrizi, and A. Karma, Isotropic finite-difference approximations for phase-field simulations of polycrystalline alloy solidification, J. Comput. Phys. 457, 111069 (2022).
  65. D. Tourret and A. Karma, Growth competition of columnar dendritic grains: A phase-field study, Acta Mater. 82, 64 (2015).
  66. B. Echebarria, A. Karma, and S. Gurevich, Onset of sidebranching in directional solidification, Phys. Rev. E 81, 021608 (2010).
  67. S. Gurevich, A. Karma, M. Plapp, and R. Trivedi, Phase-field study of three-dimensional steady-state growth shapes in directional solidification, Phys. Rev. E 81, 011603 (2010).
  68. See Supplemental Material at http://link.aps.org/supplemental/10.1103/vyd6-nj4h for the movie corresponding to the 3D phase-field simulation shown in Fig. 17.
  69. T. Pinomaa, J. M. McKeown, J. M. Wiezorek, N. Provatas, A. Laukkanen, and T. Suhonen, Phase field modeling of rapid resolidification of Al-Cu thin films, J. Cryst. Growth 532, 125418 (2020).
  70. S. Kavousi and M. Asle Zaeem, Quantitative phase-field modeling of solute trapping in rapid solidification, Acta Mater. 205, 116562 (2021).
  71. A. Mukherjee, J. A. Warren, and P. W. Voorhees, A quantitative variational phase field framework, Acta Mater. 251, 118897 (2023).
  72. P. Galenko and S. Sobolev, Local nonequilibrium effect on undercooling in rapid solidification of alloys, Phys. Rev. E 55, 343 (1997).
  73. P. Galenko, Solute trapping and diffusionless solidification in a binary system, Phys. Rev. E 76, 031606 (2007).

Outline

Information

Phys. Rev. Research 7, 033128– Published 6 August, 2025
  • Received 12 November 2024
  • Accepted 16 July 2025
Crossmark - Check for updates button
Creative Commons Logo

Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.

Published by the American Physical Society

Sign In to Your Journals Account

Filter

Filter

Article Lookup

Enter a citation