In the region of a martensitic transformation, conventional elastocaloric effect causes cooling when the forward parent to martensite transition is induced by loading under adiabatic conditions and by heating when the load is removed and the reverse transition occurs. An inverse elastocaloric effect might be expected if the reverse transition could be induced upon loading. However, this behavior is quite uncommon and inverse elastocaloric effect rarely occurs. Herein, we have successfully manufactured a Ti-50.8 at.% Ni crystal in a high proportion of favorable $R$ phase (martensite) variant containing single-variant ${\mathrm{Ti}}_3{\mathrm{Ni}}_4$ nanoprecipitates aligned along the ${\langle 111\rangle }_{B2}$ direction of the $B2$ parent phase, by means of a compressive stress associated aging along the ${\langle 111\rangle }_{B2}$ direction. The material displays inverse elastocaloric effect induced by compressive stress along the ${\left[111\right]}_{B2}$ direction in the temperature range of stability of the $R$ phase. This inverse elastocaloric effect is caused by the stress-induced reverse transformation of the high proportion of favorable $R$-phase variant that occurs when the external compressive stress is applied along the direction of the internal tensile stress induced by the aligned ${\mathrm{Ti}}_3{\mathrm{Ni}}_4$ nanoprecipitates. The mechanism giving rise to this inverse elastocaloric effect is explained by the transformation strain in the ${\left[111\right]}_{B2}$ and ${\left[1\overline{1}0\right]}_{B2}$ directions for different $R$-phase variants based on crystallography. Results indicate that the stress-associated aging process is an effective way of patterning materials to display inverse elastocaloric effect through controlling the alignment of the ${\mathrm{Ti}}_3{\mathrm{Ni}}_4$ nanoprecipitate in the Ni-rich Ti-Ni shape memory alloy.

Close

PrevNext

View figure in article

• Microstructure
• Shape memory effect
• Structural phase transition
• Single crystal materials