Reuse & Permissions

It is not necessary to obtain permission to reuse this article or its components as it is available under the terms of the Creative Commons Attribution 4.0 International license. This license permits unrestricted use, distribution, and reproduction in any medium, provided attribution to the author(s) and the published article's title, journal citation, and DOI are maintained. Please note that some figures may have been included with permission from other third parties. It is your responsibility to obtain the proper permission from the rights holder directly for these figures.

Export citation

Export citation

Choose format for download:

Download Citation
  • Open Access

Ab initio high-pressure phase diagrams of Al-Mg alloys in the low solute concentration limit

Shambhu Bhandari Sharma1,*, Shailesh Mehta2, and Dario Alfè1,3,4

  • *Contact author: shambhu.sharma.22@ucl.ac.uk

Phys. Rev. B 114, 264107 – Published 16 November, 2026

DOI: https://doi.org/10.1103/q4q1-q4g8

Abstract

Binary alloy phase diagrams at high pressure are essential for understanding solidification and chemical partitioning in both engineered materials and planetary interiors, yet their experimental determination becomes increasingly challenging under extreme conditions. We apply a fully ab initio approach [Sharma et al., J. Chem. Phys. 162, 184502 (2025)], based on density-functional theory, to compute the dilute-limit phase diagram of the Al–Mg system from ambient conditions up to 150 GPa. As a first step, we calculate the melting curves of pure fcc Al and pure hcp/bcc Mg, including the hcp–bcc phase boundary and triple point of Mg, all of which agree closely with available experimental data. The binary phase diagram is then constructed at both compositional extremes. On the Al-rich side, Mg consistently favors the liquid throughout the entire pressure range, with this preference strengthening monotonically under compression. On the Mg-rich side, Al partitions preferentially into the liquid at ambient pressure but undergoes a complete reversal within the bcc stability field of the Mg host, becoming solidfavoring (k=1.12±0.03) by 60 GPa. This pressure-driven reversal inverts the topology of the Mg-rich coexistence field from a conventional downward-sloping to an upward-sloping phase boundary, and can be useful for models of planetary differentiation and interior chemical stratification.

View figure in article

Physics Subject Headings (PhySH)

Article Text

Supplemental Material

References (54)

  1. D. R. Gaskell and D. E. Laughlin, Introduction to the Thermodynamics of Materials (CRC Press, Boca Raton, FL, 2024).
  2. ASM Handbook, Vol. 3: Alloy Phase Diagrams, edited by H. Okamoto, M. E. Schlesinger, and E. M. Mueller (ASM International, Materials Park, OH, 2016).
  3. J. Schön and M. Jansen, Prediction, determination and validation of phase diagrams via the global study of energy landscapes, Int. J. Mater. Res. 100, 135 (2009).
  4. M. Enoki, S. Minamoto, I. Ohnuma, T. Abe, and H. Ohtani, Current status and future scope of phase diagram studies, ISIJ International 63, 407 (2023).
  5. Phase Diagrams: Understanding the Basics, edited by F. C. Campbell (ASM International, Materials Park, OH, 2012).
  6. Methods for Phase Diagram Determination, edited by J.-C. Zhao (Elsevier, Oxford, 2007).
  7. H. Lukas, S. G. Fries, and B. Sundman, Computational Thermodynamics: The CALPHAD Method (Cambridge University Press, Cambridge, UK, 2007).
  8. N. Saunders and A. P. Miodownik, CALPHAD (Calculation of Phase Diagrams): A Comprehensive Guide, Pergamon Materials Series Vol. 1 (Pergamon, Oxford, 1998).
  9. F. Zipoli, V. Viterbo, O. Schilter, L. Kahle, and T. Laino, Prediction of phase diagrams and associated phase structural properties, Ind. Eng. Chem. Res. 61, 8378 (2022).
  10. G. Wang, C. Wang, X. Zhang, Z. Li, J. Zhou, and Z. Sun, Machine learning interatomic potential: Bridge the gap between small-scale models and realistic device-scale simulations, Iscience 27, 109673 (2024).
  11. S. Zhu, D. Sarıtürk, and R. Arróyave, Machine learning potentials for alloys: A detailed workflow to predict phase diagrams and benchmark accuracy, npj Comput. Mater. 11, 340 (2025).
  12. A. Walle and G. Ceder, Automating first-principles phase diagram calculations, J. Phase Equilibria 23, 348 (2002).
  13. S. Liu, G. Esteban-Manzanares, and J. LLorca, First principles prediction of the Al-Li phase diagram, Metall. Mater. Trans. A 52, 4675 (2021).
  14. D. Alfè, M. J. Gillan, and G. D. Price, Ab initio chemical potentials of solid and liquid solutions and the chemistry of the Earth's core, J. Chem. Phys. 116, 7127 (2002).
  15. D. Alfè, M. J. Gillan, and G. D. Price, Composition and temperature of the Earth's core constrained by combining ab initio calculations and seismic data, Earth Planet. Sci. Lett. 195, 91 (2002).
  16. J. Chipman, Thermodynamics and phase diagram of the Fe-C system, Metall. Trans. 3, 55 (1972).
  17. K. Hirose, B. Wood, and L. Vočadlo, Light elements in the Earth's core, Nat. Rev. Earth Environ. 2, 645 (2021).
  18. Z. Zhang, G. Csányi, D. Alfè, Y. Zhang, J. Li, and J. Liu, Free energies of Fe-O-Si ternary liquids at high temperatures and pressures: Implications for the evolution of the Earth's core composition, Geophys. Res. Lett. 49, e2021GL096749 (2022).
  19. S. B. Sharma, S. Mehta, and D. Alfè, Ab initio phase diagrams of binary alloys in the low solute concentration limit, J. Chem. Phys. 162, 184502 (2025).
  20. M. Mendelev, M. Asta, M. Rahman, and J. Hoyt, Development of interatomic potentials appropriate for simulation of solid–liquid interface properties in Al–Mg alloys, Philos. Mag. 89, 3269 (2009).
  21. M. P. Liu, H. J. Roven, M. Y. Murashkin, R. Z. Valiev, A. Kilmametov, Z. Zhang, and Y. Yu, Structure and mechanical properties of nanostructured Al–Mg alloys processed by severe plastic deformation, J. Mater. Sci. 48, 4681 (2013).
  22. J. L. Murray, The Al-Mg (aluminum-magnesium) system, J. Phase Equilib. 3, 60 (1982).
  23. M. S. Daw and M. I. Baskes, Semiempirical, quantum mechanical calculation of hydrogen embrittlement in metals, Phys. Rev. Lett. 50, 1285 (1983).
  24. See Supplemental Material at http://link.aps.org/supplemental/10.1103/q4q1-q4g8 for quantitative EAM benchmark errors and residual distributions, running free-energy convergence diagnostics and threshold tolerance, complete numerical thermodynamic parameters along the melting lines, supercell size and k-point discretization convergence tests, phonon dispersion relations and dynamical stability of Mg, and explicit analytical error propagation formulations.
  25. M. P. Allen and D. J. Tildesley, Computer Simulation of Liquids (Oxford University Press, Oxford, 2017).
  26. D. Alfè, M. J. Gillan, and G. D. Price, Complementary approaches to the ab initio calculation of melting properties, J. Chem. Phys. 116, 6170 (2002).
  27. S. Mehta, G. D. Price, and D. Alfè, Ab initio thermodynamics and phase diagram of solid magnesium: A comparison of the LDA and GGA, J. Chem. Phys. 125, 194507 (2006).
  28. D. Alfè, PHON: A program to calculate phonons using the small displacement method, Comput. Phys. Commun. 180, 2622 (2009).
  29. G. Kresse and J. Furthmüller, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Phys. Rev. B 54, 11169 (1996).
  30. G. Kresse and D. Joubert, From ultrasoft pseudopotentials to the projector augmented-wave method, Phys. Rev. B 59, 1758 (1999).
  31. P. E. Blüochl, Projector augmented-wave method, Phys. Rev. B 50, 17953 (1994).
  32. J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized gradient approximation made simple, Phys. Rev. Lett. 77, 3865 (1996).
  33. N. D. Mermin, Thermal properties of the inhomogeneous electron gas, Phys. Rev. 137, A1441 (1965).
  34. S. Nosé, A molecular dynamics method for simulations in the canonical ensemble, Mol. Phys. 52, 255 (1984).
  35. H. J. Monkhorst and J. D. Pack, Special points for Brillouin-zone integrations, Phys. Rev. B 13, 5188 (1976).
  36. L. Vočadlo and D. Alfè, Ab initio melting curve of the fcc phase of aluminum, Phys. Rev. B 65, 214105 (2002).
  37. D. N. Polsin, D. E. Fratanduono, J. R. Rygg, A. Lazicki, R. F. Smith, J. H. Eggert, M. C. Gregor, B. J. Henderson, X. Gong, J. A. Delettrez, R. G. Kraus, P. M. Celliers, F. Coppari, D. C. Swift, C. A. McCoy, C. T. Seagle, J.-P. Davis, S. J. Burns, G. W. Collins, and T. R. Boehly, X-ray diffraction of ramp-compressed aluminum to 475 GPa, Phys. Plasmas 25, 082709 (2018).
  38. Y. Akahama, M. Nishimura, K. Kinoshita, H. Kawamura, and Y. Ohishi, Evidence of a fcc-hcp transition in aluminum at multimegabar pressure, Phys. Rev. Lett. 96, 045505 (2006).
  39. Y. B. Kudasov, O. Surdin, A. Korshunov, V. Pavlov, N. Frolova, and R. Kuzin, Lattice dynamics and phase diagram of aluminum at high temperatures, J. Exp. Theor. Phys. 117, 664 (2013).
  40. J. Bouchet, F. Bottin, G. Jomard, and G. Zérah, Melting curve of aluminum up to 300 GPa obtained through ab initio molecular dynamics simulations, Phys. Rev. B 80, 094102 (2009).
  41. R. Boehler and M. Ross, Melting curve of aluminum in a diamond cell to 0.8 Mbar: Implications for iron, Earth Planet. Sci. Lett. 153, 223 (1997).
  42. A. Hänström and P. Lazor, High pressure melting and equation of state of aluminium, J. Alloys Compd. 305, 209 (2000).
  43. D. Errandonea, The melting curve of ten metals up to 12 GPa and 1600 K, J. Appl. Phys. 108, 033517 (2010).
  44. High Pressure in Science and Technology, Proceedings of the 9th AIRAPT International High Pressure Conference, Albany, NY, 1983, Parts I-III, edited by C. Homan, R. K. MacCrone, and E. Whalley, Materials Research Society Symposia Proceedings Vol. 22 (North-Holland/Elsevier, New York, 1984).
  45. H. Olijnyk and W. Holzapfel, High-pressure structural phase transition in Mg, Phys. Rev. B 31, 4682 (1985).
  46. G. W. Stinton, S. G. MacLeod, H. Cynn, D. Errandonea, W. J. Evans, J. E. Proctor, Y. Meng, and M. I. McMahon, Equation of state and high-pressure/high-temperature phase diagram of magnesium, Phys. Rev. B 90, 134105 (2014).
  47. C. Cui, J. Xian, H. Liu, F. Tian, X. Gao, and H. Song, Melting curve of magnesium up to 460 GPa from ab initio molecular dynamics simulations, J. Appl. Phys. 131, 195901 (2022).
  48. V. G. Fletcher, A. P. Bartók, and L. B. Pártay, Autonomous thermodynamically informed database generation for machine-learned interatomic potentials and application to magnesium, npj Comput. Mater. 12, 36 (2026).
  49. J. E. Sansonetti and W. C. Martin, Handbook of basic atomic spectroscopic data, J. Phys. Chem. Ref. Data 34, 1559 (2005).
  50. M. W. Chase Jr., C. A. Davies, J. R. Downey Jr., D. A. Frurip, R. A. McDonald, and A. N. Syverud, JANAF Thermochemical Tables, Third Edition, Part II: Cr–Zr, J. Phys. Chem. Ref. Data 14(Suppl. 1), 927 (1985).
  51. Q.-J. Hong and A. van de Walle, Reentrant melting of sodium, magnesium, and aluminum: General trend, Phys. Rev. B 100, 140102 (2019).
  52. J. F. Cannon, Behavior of the elements at high pressures, J. Phys. Chem. Ref. Data 3, 781 (1974).
  53. M. W. Chase Jr., NIST–JANAF Thermochemical Tables, 4th ed., J. Phys. Chem. Ref. Data, Monograph 9 (American Chemical Society and American Institute of Physics, Woodbury, NY, 1998), pp. 1–1951.
  54. ARCHER2 (The UK National Supercomputing Service), https://www.archer2.ac.uk.

Outline

Information

Sign In to Your Journals Account

Filter

Filter

Article Lookup

Enter a citation