• Accepted Paper

Surface passivation and injection-level-dependent carrier recombination dynamics in strained Ge and Ge-Sn

Apoorva Rose, Steven Johnston, S. Karthikeyan, Muntasir Mahdi, Ze Zong, Wei Zhou, and Mantu K. Hudait

Phys. Rev. Applied - Accepted 12 November, 2026

DOI: https://doi.org/10.1103/79yh-8w45

Abstract

Strain-engineered Ge and GeSn heterostructures are promising group-IV platforms for lasers and photodetectors in monolithic optoelectronics integration, yet their high surface-to-volume ratio often leads to surface recombination dominating and reducing the effective carrier lifetime (τeff). Mitigating this loss pathway requires effective surface passivation to suppress the surface recombination velocity (S). Here, we examine the carrier recombination dynamics of tensile-strained Ge (0.78% ε-Ge/In₀.₁₁₅Ga₀.₈₈₅As/GaAs and 1.6% ε-Ge/In₀.₂₄Ga₀.₇₆As/GaAs) and compressively strained GeSn (−0.53% c-Ge0.97Sn0.03/AlAs/GaAs) epilayers using the microwave-reflection photoconductive decay technique under varying injection levels and with surface passivation. Two passivation strategies are evaluated: ex-situ Al₂O₃ deposited by atomic layer deposition technique and an in-situ InGaAs cap grown by molecular beam epitaxy. High-resolution X-ray diffraction and 2D Raman spectroscopy confirm structural integrity and strain retention following surface passivation. Thickness-dependent analysis of the Al₂O₃-passivated 0.78% ε-Ge heterostructure yields S = 29.25 cm/s, demonstrating strong reduction of surface recombination. Both passivation schemes enhance τeff across strained Ge-based epilayers; however, for 1.6% ε-Ge, the in-situ InGaAs cap provides superior lifetime, exhibiting τeff = 411 ns. Injection-dependent measurements further highlight recombination pathways at elevated carrier densities (~10¹⁵ cm⁻³), where saturation of Shockley-Read-Hall (SRH) traps reveals microsecond-scale lifetimes (0.6-3 µs). These results indicate low SRH defect densities and high crystalline quality of the ε-Ge epilayers, offering a quantitative basis for assessing material quality and guiding the design of high-performance group-IV optoelectronic devices.

Export citation

Export citation

Choose format for download:

Download Citation

If the author has provided any supplemental materials with this article they will be available upon publication of the version of record.

Sign In to Your Journals Account

Filter

Filter

Article Lookup

Enter a citation