Reuse & Permissions

It is not necessary to obtain permission to reuse this article or its components as it is available under the terms of the Creative Commons Attribution 4.0 International license. This license permits unrestricted use, distribution, and reproduction in any medium, provided attribution to the author(s) and the published article's title, journal citation, and DOI are maintained. Please note that some figures may have been included with permission from other third parties. It is your responsibility to obtain the proper permission from the rights holder directly for these figures.

Export citation

Export citation

Choose format for download:

Download Citation
  • Open Access

Pathways to High Efficiency Perovskite Monolithic Solar Modules

Xuezeng Dai1, Shangshang Chen1, Yehao Deng1, Allen Wood1, Guang Yang1, Chengbin Fei1, and Jinsong Huang1,2,*

  • 1Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599, USA
  • 2Department of Chemistry, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599, USA

  • *jhuang@unc.edu

PRX Energy 1, 013004 – Published 13 May, 2022

DOI: https://doi.org/10.1103/PRXEnergy.1.013004

Abstract

With the rapidly improving efficiency and stability of perovskite solar cells, the transition of small area device fabrication innovations into modules is becoming increasingly important for the commercialization of this technology. The record efficiencies of small perovskite cells are already approaching that of the best silicon crystal solar cells, but the module efficiencies are still far behind. Understanding the factors that cause the cell-to-module (CTM) efficiency loss is critical for large area perovskite module development. Here, we experimentally validate a comprehensive model that analyzes the CTM efficiency loss with a precision better than 97%. Using the model, we decipher the impact of the critical module components and fabrication variables, including perovskite band gap, transparent electrodes, scribing lines, and film uniformity, on module aperture efficiency. Our analysis provides pathways toward the aperture efficiency ceiling of 25.8% for single-junction perovskite solar modules with a band gap of 1.49 eV. Enlightened by the model, we find that tandem structures have intrinsic merit to achieve high efficiency perovskite modules of 28.4% with a much lower CTM derate due to the smaller photocurrent but larger photovoltage.

View figure in article

Physics Subject Headings (PhySH)

Popular Summary

Article Text

Supplemental Material

References (61)

  1. S. Chen, X. Dai, S. Xu, H. Jiao, L. Zhao, and J. Huang, Stabilizing perovskite-substrate interfaces for high-performance perovskite modules, Science 373, 902 (2021).
  2. Y. Deng, S. Xu, S. Chen, X. Xiao, J. Zhao, and J. Huang, Defect compensation in formamidinium–caesium perovskites for highly efficient solar mini-modules with improved photostability, Nat. Energy 6, 633 (2021).
  3. Y. Deng, Z. Ni, A. F. Palmstrom, J. Zhao, S. Xu, C. H. Van Brackle, X. Xiao, K. Zhu, and J. Huang, Reduced self-doping of perovskites induced by short annealing for efficient solar modules, Joule 4, 1949 (2020).
  4. S. Chen, X. Xiao, H. Gu, and J. Huang, Iodine reduction for reproducible and high-performance perovskite solar cells and modules, Sci. Adv. 7, eabe8130 (2021).
  5. Z. Yang, W. Zhang, S. Wu, H. Zhu, Z. Liu, Z. Liu, Z. Jiang, R. Chen, J. Zhou, and Q. Lu, Slot-die coating large-area formamidinium-cesium perovskite film for efficient and stable parallel solar module, Sci. Adv. 7, eabg3749 (2021).
  6. X. Dai, Y. Deng, C. H. Van Brackle, and J. Huang, Meniscus fabrication of halide perovskite thin films at high throughput for large area and low-cost solar panels, Int. J. Extrem Manuf. 1, 022004 (2019).
  7. J. Li, J. Dagar, O. Shargaieva, M. A. Flatken, H. Köbler, M. Fenske, C. Schultz, B. Stegemann, J. Just, D. M. Többens, A. Abate, R. Munir, and E. Unger, 20.8% slot-die coated MAPbI3 perovskite solar cells by optimal DMSO-content and age of 2-ME based precursor inks, Adv. Energy Mater. 11, 2003460 (2021).
  8. F. Mathies, H. Eggers, B. S. Richards, G. Hernandez-Sosa, U. Lemmer, and U. W. Paetzold, Inkjet-printed triple cation perovskite solar cells, ACS Appl. Energy Mater. 1, 1834 (2018).
  9. H. Eggers, F. Schackmar, T. Abzieher, Q. Sun, U. Lemmer, Y. Vaynzof, B. S. Richards, G. Hernandez-Sosa, and U. W. Paetzold, Inkjet-printed micrometer-thick perovskite solar cells with large columnar grains, Adv. Energy Mater. 10, 1903184 (2020).
  10. C. Liang, P. Li, H. Gu, Y. Zhang, F. Li, Y. Song, G. Shao, N. Mathews, and G. Xing, One-step inkjet printed perovskite in air for efficient light harvesting, Solar RRL 2, 1700217 (2018).
  11. A. Extance, The reality behind solar power's next star material, Nature 570, 429 (2019).
  12. M. A. Green, E. D. Dunlop, J. Hohl-Ebinger, M. Yoshita, N. Kopidakis, and X. Hao, Solar cell efficiency tables (version 59), Prog. Photovoltaics 30, 3 (2022).
  13. Best Research-Cell Efficiency Chart, www.nrel.gov/pv/cell-efficiency.html (Accessed February 11 2022).
  14. Y. Deng, C. H. Van Brackle, X. Dai, J. Zhao, B. Chen, and J. Huang, Tailoring solvent coordination for high-speed, room-temperature blading of perovskite photovoltaic films, Sci. Adv. 5, eaax7537 (2019).
  15. Y. Deng, X. Zheng, Y. Bai, Q. Wang, J. Zhao, and J. Huang, Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules, Nat. Energy 3, 560 (2018).
  16. S. Chen, X. Xiao, B. Chen, L. L. Kelly, J. Zhao, Y. Lin, M. F. Toney, and J. Huang, Crystallization in one-step solution deposition of perovskite films: Upward or downward?, Sci. Adv. 7, eabb2412 (2021).
  17. L. Schmidt-Mende, V. Dyakonov, S. Olthof, F. Ünlü, K. M. T. Lê, S. Mathur, A. D. Karabanov, D. C. Lupascu, L. M. Herz, and A. Hinderhofer, Roadmap on organic–inorganic hybrid perovskite semiconductors and devices, APL Mater. 9, 109202 (2021).
  18. F. Matteocci, L. A. Castriotta, and A. L. Palma, Photoenergy and Thin Film Materials (Scrivener Publishing LLC, Wiley, Beverly, MA, 2019), p. 121.
  19. D. H. Kim, J. B. Whitaker, Z. Li, M. F. A. M. van Hest, and K. Zhu, Outlook and challenges of perovskite solar cells toward terawatt-scale photovoltaic module technology, Joule 2, 1437 (2018).
  20. L. Gao, L. Chen, S. Huang, X. Li, and G. Yang, Series and parallel module design for large-area perovskite solar cells, ACS Appl. Energy Mater. 2, 3851 (2019).
  21. L. Qiu, S. He, L. K. Ono, S. Liu, and Y. Qi, Scalable fabrication of metal halide perovskite solar cells and modules, ACS Energy Lett. 4, 2147 (2019).
  22. N.-G. Park and K. Zhu, Scalable fabrication and coating methods for perovskite solar cells and solar modules, Nat. Rev. Mater. 5, 333 (2020).
  23. J. Kim, J. S. Yun, Y. Cho, D. S. Lee, B. Wilkinson, A. M. Soufiani, X. Deng, J. Zheng, A. Shi, S. Lim, S. Chen, Z. Hameiri, M. Zhang, C. F. J. Lau, S. Huang, M. A. Green, and A. W. Y. Ho-Baillie, Overcoming the challenges of large-area high-efficiency perovskite solar cells, ACS Energy Lett. 2, 1978 (2017).
  24. B. Wilkinson, N. L. Chang, M. A. Green, and A. W. Ho-Baillie, Scaling limits to large area perovskite solar cell efficiency, Prog. Photovoltaics 26, 659 (2018).
  25. Champion Photovoltaic Module Efficiency Chart, www.nrel.gov/pv/module-efficiency.html (Accessed February 11 2022).
  26. S.-J. Moon, J.-H. Yum, L. Löfgren, A. Walter, L. Sansonnens, M. Benkhaira, S. Nicolay, J. Bailat, and C. Ballif, Laser-scribing patterning for the production of organometallic halide perovskite solar modules, IEEE J. Photovolt. 5, 1087 (2015).
  27. A. L. Palma, F. Matteocci, A. Agresti, S. Pescetelli, E. Calabrò, L. Vesce, S. Christiansen, M. Schmidt, and A. Di Carlo, Laser-patterning engineering for perovskite solar modules with 95% aperture ratio, IEEE J. Photovolt. 7, 1674 (2017).
  28. B. Turan and S. Haas, Scribe width optimization of absorber laser ablation for thin-film silicon solar modules, J. Laser Micro Nanoeng. 8, 234 (2013).
  29. F. Di Giacomo, L. A. Castriotta, F. U. Kosasih, D. Di Girolamo, C. Ducati, and A. Di Carlo, Upscaling inverted perovskite solar cells: Optimization of laser scribing for highly efficient mini-modules, Micromachines 11, 1127 (2020).
  30. L. A. Castriotta, M. Zendehdel, N. Yaghoobi Nia, E. Leonardi, M. Löffler, B. Paci, A. Generosi, B. Rellinghaus, and A. Di Carlo, Reducing losses in perovskite large area solar technology: Laser design optimization for highly efficient modules and minipanels, Adv. Energy Mater. 12, 2103420 (2022).
  31. Finger Resistance, www.pveducation.org/pvcdrom/design-of-silicon-cells/finger-resistance (Accessed February 11 2022).
  32. See the Supplemental Material at http://link.aps.org/supplemental/10.1103/PRXEnergy.1.013004 for the statistical performance of the 8 mm small area MAFAPbI perovskite cells on 15 Ω/□ ITO substrates.
  33. See the Supplemental Material at http://link.aps.org/supplemental/10.1103/PRXEnergy.1.013004 for specifications of the perovskite solar modules with different subcell widths.
  34. See the Supplemental Material at http://link.aps.org/supplemental/10.1103/PRXEnergy.1.013004 for state-of-the-art perovskite solar cells with different perovskite band gaps from Refs. [35, 36, 37, 38, 59, 60, 61].
  35. J. Jeong, M. Kim, J. Seo, H. Lu, P. Ahlawat, A. Mishra, Y. Yang, M. A. Hope, F. T. Eickemeyer, and M. Kim, Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells, Nature 592, 381 (2021).
  36. J. J. Yoo, G. Seo, M. R. Chua, T. G. Park, Y. Lu, F. Rotermund, Y.-K. Kim, C. S. Moon, N. J. Jeon, and J.-P. Correa-Baena, Efficient perovskite solar cells via improved carrier management, Nature 590, 587 (2021).
  37. M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, and N. Wu, Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells, Adv. Funct. Mater. 30, 1907962 (2020).
  38. H. Min, D. Y. Lee, J. Kim, G. Kim, K. S. Lee, J. Kim, M. J. Paik, Y. K. Kim, K. S. Kim, and M. G. Kim, Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes, Nature 598, 444 (2021).
  39. Q. Jiang, Y. Zhao, X. Zhang, X. Yang, Y. Chen, Z. Chu, Q. Ye, X. Li, Z. Yin, and J. You, Surface passivation of perovskite film for efficient solar cells, Nat. Photonics 13, 460 (2019).
  40. Y. Zhou, I. Poli, D. Meggiolaro, F. De Angelis, and A. Petrozza, Defect activity in metal halide perovskites with wide and narrow bandgap, Nat. Rev. Mater. 6, 986 (2021).
  41. See the Supplemental Material at http://link.aps.org/supplemental/10.1103/PRXEnergy.1.013004 for the statistical performance of 8 mm small area MAFAPbI perovskite cells on 10 Ω/□ ITO substrates.
  42. See the Supplemental Material at http://link.aps.org/supplemental/10.1103/PRXEnergy.1.013004 for the transparency of ITO with sheet resistances of 15 and 10 Ω/□.
  43. See the Supplemental Material at http://link.aps.org/supplemental/10.1103/PRXEnergy.1.013004 for the perovskite modules fabricated on 10 Ω/□ ITO.
  44. See the Supplemental Material at http://link.aps.org/supplemental/10.1103/PRXEnergy.1.013004 for specifications of the perovskite solar modules on 10 Ω/□ ITO.
  45. M. Jeong, I. W. Choi, K. Yim, S. Jeong, M. Kim, S. J. Choi, Y. Cho, J.-H. An, H.-B. Kim, and Y. Jo, Large-area perovskite solar cells employing spiro-naph hole transport material, Nat. Photonic 16, 119 (2022).
  46. P. Zhang, Y. Lau, and R. Gilgenbach, Analysis of current crowding in thin film contacts from exact field solution, J. Phys. D: Appl. Phys. 48, 475501 (2015).
  47. P. Vinod, Specific contact resistance measurements of the screen-printed Ag thick film contacts in the silicon solar cells by three-point probe methodology and TLM method, J. Mater. Sci.: Mater. Electron. 22, 1248 (2011).
  48. F. Matteocci, L. Cinà, F. Di Giacomo, S. Razza, A. L. Palma, A. Guidobaldi, A. D'Epifanio, S. Licoccia, T. M. Brown, and A. Reale, High efficiency photovoltaic module based on mesoscopic organometal halide perovskite, Prog. Photovoltaics 24, 436 (2016).
  49. See the Supplemental Material at http://link.aps.org/supplemental/10.1103/PRXEnergy.1.013004 for the measurement of transfer length (LT) by the TLM method.
  50. I. Rogelj, P. Ziger, and P. Eiselt, in China PV Technology International Conference (2012), p. 21.
  51. See the Supplemental Material at http://link.aps.org/supplemental/10.1103/PRXEnergy.1.013004 for the impact of partial shading on modules with four subcells and six subcells.
  52. J. Werner, C. C. Boyd, T. Moot, E. J. Wolf, R. M. France, S. A. Johnson, M. F. van Hest, J. M. Luther, K. Zhu, and J. J. Berry, Learning from existing photovoltaic technologies to identify alternative perovskite module designs, Energy Environ. Sci. 13, 3393 (2020).
  53. See the Supplemental Material at http://link.aps.org/supplemental/10.1103/PRXEnergy.1.013004 for the selected certification performance of a single-junction perovskite solar cell and perovskite tandem solar cells.
  54. K. Xiao, R. Lin, Q. Han, Y. Hou, Z. Qin, H. T. Nguyen, J. Wen, M. Wei, V. Yeddu, and M. I. Saidaminov, All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm2 using surface-anchoring zwitterionic antioxidant, Nat. Energy 5, 870 (2020).
  55. R. Lin, J. Xu, M. Wei, Y. Wang, Z. Qin, Z. Liu, J. Wu, K. Xiao, B. Chen, and S. M. Park, All-perovskite tandem solar cells with improved grain surface passivation, Nature 603, 73 (2022).
  56. A. Al-Ashouri, E. Köhnen, B. Li, A. Magomedov, H. Hempel, P. Caprioglio, J. A. Márquez, A. B. Morales Vilches, E. Kasparavicius, and J. A. Smith, Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction, Science 370, 1300 (2020).
  57. X. Zheng, A. Y. Alsalloum, Y. Hou, E. H. Sargent, and O. M. Bakr, All-perovskite tandem solar cells: A roadmap to uniting high efficiency with high stability, Acc. Mater. Res. 1, 63 (2020).
  58. G. Reeves and H. Harrison, Obtaining the specific contact resistance from transmission line model measurements, IEEE Electron Device Lett. 3, 111 (1982).
  59. G. Kapil, T. Bessho, Y. Sanehira, S. R. Sahamir, M. Chen, A. K. Baranwal, D. Liu, Y. Sono, D. Hirotani, and D. Nomura, Tin–lead perovskite solar cells fabricated on hole selective monolayers, ACS Energy Lett. 7, 966 (2022).
  60. J. Y. Ye, J. Tong, J. Hu, C. Xiao, H. Lu, S. P. Dunfield, D. H. Kim, X. Chen, B. W. Larson, and J. Hao, Enhancing charge transport of 2D perovskite passivation agent for wide-bandgap perovskite solar cells beyond 21%, Solar RRL 4, 2000082 (2020).
  61. X. Gu, W. Xiang, Q. Tian, and S. Liu, Rational surface-defect control via designed passivation for high-efficiency inorganic perovskite solar cells, Angew. Chem. 133, 23348 (2021).

Outline

Information

Sign In to Your Journals Account

Filter

Filter

Article Lookup

Enter a citation