- Editors' Suggestion
- Open Access
Interaction of degenerate higher-order modes in periodic superconducting rf accelerating structures
Phys. Rev. Accel. Beams 29, 114601 – Published 17 November, 2026
DOI: https://doi.org/10.1103/blpm-g4sl
Abstract
Some higher-order mode (HOM) passbands in multicell superconducting rf accelerating structures may become “flat,” meaning that they have an extremely narrow bandwidth due to weak coupling between cells. In the presence of random perturbations caused by mechanical imperfections of the cell shapes, such passbands can split into individual cell resonances that are weakly coupled or completely uncoupled from the beam pipes. As a result, these modes can exhibit high-quality factors and large values, potentially leading to beam instabilities, emittance growth, and excessive cryogenic losses. This effect was observed in a high-beta five-cell 650 MHz (HB650) prototype cavity developed for the PIP-II project. An analytical theory explaining the origin of this phenomenon, along with methods to mitigate it, is presented in this paper. The HB650 cavity was successfully redesigned to eliminate the flat HOM passband and prevent the associated detrimental effects.
Physics Subject Headings (PhySH)
Article Text
References (16)
- J. Sekutowicz, HOM damping and power extraction from superconducting cavities, in Proc. 2006 Linear Accel. Conf. (Knoxville, TN, USA, 2006), pp. 506–510.
- I. V. Gonin, E. Borissov, A. Grassellino, C. J. Grimm, V. Jain, S. Kazakov, V. A. Lebedev, A. Lunin, C. S. Mishra, D. V. Mitchell, T. H. Nicol, Y. M. Pischalnikov, G. V. Romanov, A. M. Rowe, N. K. Sharma, N. Solyak, and V. P. Yakovlev, 650 MHz Elliptical Superconducting RF cavities for PIP-II project, in Proc. 28th Int. Linear Accel. Conf. (Lancing, MI, USA, 2016), pp. 943–945.
- N. Solyak, E. Gianfelice-Wendt, I. Gonin, S. Kazakov, V. A. Lebedev, S. Nagaitsev, J.-F. Ostiguy, N. Perunov, G. V. Romanov, and V. P. Yakovlev, The concept design of the CW linac of the Project X, in Proc. Int. Part. Accel. Conf. (Kyoto, Japan, 2010), pp. 654–656.
- A. Lunin, A. Saini, A. Sukhanov, N. Solyak, and V. Yakovlev, Alternative cavity for high energy part of the Project X linac, in Proc. 2nd Int. Part. Accel. Conf. (New Orlean, LA, USA, 2012), pp. 2997–2999.
- A. Lunin, T. Khabiboulline, N. Solyak, A. Sukhanov, and V. Yakovlev, Statistical analysis of the eigenmode spectrum in the SRF cavities with mechanical imperfections, Proc. 13th Int. Comput. Accel. Phys. Conf. ICAP2018 (Key West, Florida, USA, 2018), p. 265.
- D. E. Nagle, E. A. Knapp, and B. C. Knapp, Coupled resonator model for standing wave accelerator tanks, Rev. Sci. Instrum. 38, 1583 (1967).
- A. Citron, G. Dammertz, M. Grundner, L. Husson, R. Lehm, and H. Lengeler, The Karlsruhe–CERN superconducting RF separator, Nucl. Instrum. Methods Phys. Res. 164, 31 (1979).
- R. B. R. Shersby-Harvi and L. B. Mullett, A travelling wave linear accelerator with R.F. power feedback, and an observation of R.F. absorption by gas in presence of a magnetic field, Proc. Phys. Soc. B 62, 270 (1949).
- B. V. Schteinshleiger, Phenomena of wave interactions in electromagnetic resonators (Oborongiz, Moscow, Russian, 1955).
- L. D. Landau and E. M. Lifshits, Quantum Mechanics (Pergamon Press, New York, pp. 1965), p. 133.
- B. V. Schteinshleiger, Phenomena in electromagnetic resonators near the points of coincidence of resonance frequencies, Sov. Phys. Doklady LXV, 669 (1949).
- H. A. Bethe, Physics of diffraction by small holes, Phys. Rev. 66, 163 (1944).
- A. Sulimov, G. Kreps, and J. Sekutowicz, Estimation of small geometry deviation for TESLA-shape cavities due to inner surface polishing, in Proc. 16th Int. Conf. RF Supercond. (Paris, France, 2013), pp. 537–539.
- R. Johnson and Ch Ankenbrandt, High power SRF linacs for ADS reactors, in Proc. Int. Part. Accel. Conf. (Kyoto, Japan, 2010), pp. 163–165.
- B. Yee-Rendon, Overview of ADS projects in the world, in Proc. 31st Int. Linear Accel. Conf. (Liverpool, UK, 2022), pp. 310–313.
- S. Kazakov, A new traveling-wave mixed-mode RF window with a low electric field in ceramic-metal brazing area, KEK preprint 98–140 (1998).