Reuse & Permissions

It is not necessary to obtain permission to reuse this article or its components as it is available under the terms of the Creative Commons Attribution 4.0 International license. This license permits unrestricted use, distribution, and reproduction in any medium, provided attribution to the author(s) and the published article's title, journal citation, and DOI are maintained. Please note that some figures may have been included with permission from other third parties. It is your responsibility to obtain the proper permission from the rights holder directly for these figures.

Export citation

Export citation

Choose format for download:

Download Citation
  • Open Access

Magnesium diboride on inner wall of copper tube: A test case for superconducting radio frequency cavities

Wenura K. Withanage1,*, N. H. Lee1, Sashank V. Penmatsa1, M. A. Wolak1,†, A. Nassiri2,3, and X. X. Xi1

  • 1Department of Physics, Temple University, Philadelphia, Pennsylvania 19122, USA
  • 2Argonne National Laboratory, Argonne, Illinois 60439, USA
  • 3College of Engineering, Michigan State University, East Lansing, Michigan 48824, USA

  • *tue76590@temple.edu
  • †Present address: Sandia National Laboratories, Albuquerque, NM 87185, USA.

Phys. Rev. Accel. Beams 20, 102002 – Published 31 October, 2017

DOI: https://doi.org/10.1103/PhysRevAccelBeams.20.102002

Abstract

Superconductor magnesium diboride is considered one of the viable materials to substitute bulk niobium for superconducting radio frequency cavities. Utilizing a MgB2 coating on the inner wall of a copper cavity will allow operation at higher temperatures (20–25 K) than Nb cavities due to the high transition temperature of MgB2 (39 K) and the high thermal conductivity of Cu. In this paper, we present results of MgB2 coating on Cu tubes with similar dimensions to a 3 GHz cavity, as the first step towards coating the actual cavity, using the hybrid physical chemical vapor deposition technique. The results show successful coating of a uniform MgB2 layer on the inner wall of the Cu tubes with Tc as high as 37 K.

View figure in article

Physics Subject Headings (PhySH)

Collections

This article appears in the following collection:

SRF2017 Conference Edition

A collection of articles that expand upon original research presented at the 18th International Conference on RF Superconductivity (SRF 2017) (17-21 July 2017, Lanzhou, China).

Article Text

References (13)

  1. G. Ciovati, Where next with SRF?, in Proceedings of the 4th International Particle Accelerator Conference, IPAC-2013, Shanghai, China, 2013 (JACoW, Shanghai, China, 2013).
  2. J. Nagamatsu, N. Nakagawa, T. Muranaka, Y. Zenitani, and J. Akimitsu, Superconductivity at 39 K in magnesium diboride, Nature (London) 410, 63 (2001).
  3. X. X. Xi et al., MgB2 thin films by hybrid physical–chemical vapor deposition, Physica (Amsterdam) 456C, 22 (2007).
  4. T. Tajima, Possibility of MgB2 application to superconducting cavities, in Proceedings of the 8th European Particle Accelerator Conference, Paris, 2002 (EPS-IGA and CERN, Geneva, 2002).
  5. C. Buzea and T. Yamashita, Review of the superconducting properties of MgB2, Supercond. Sci. Technol. 14, R115 (2001).
  6. E. W. Collings, M. D. Sumption, and T. Tajima, Magnesium diboride superconducting RF resonant cavities for high energy particle acceleration, Supercond. Sci. Technol. 17, S595 (2004).
  7. H. Padamsee, J. Knobloch, and T. Hays, RF Superconductivity for Accelerators, 2nd ed. (Wiley-VCH Verlag GmbH & Co., Morlenbach, Germany, 2008).
  8. W. K. Withanage, X. X. Xi, A. Nassiri, N. Lee, M. A. Wolak, T. Tan, P. B. Welander, M. Franzi, S. Tantawi, and R. L. Kustom, Growth of magnesium diboride films on 2 inch diameter copper discs by hybrid physical–chemical vapor deposition, Supercond. Sci. Technol. 30, 045001 (2017).
  9. Y. Hishinuma, A. Kikuchi, Y. Iijima, Y. Yoshida, T. Takeuchi, and A. Nishimura, Superconducting Properties of   Mg2Cu-Doped MgB2 Wires With Several Metal Sheath for Fusion Reactor Application, IEEE Trans. Appl. Supercond. 17, 2798 (2007).
  10. A. Kikuchi, Y. Yoshida, Y. Iijima, N. Banno, T. Takeuchi, and K. Inoue, The synthesis of MgB2 superconductor using   Mg2Cu as a starting material, Supercond. Sci. Technol. 17, 781 (2004).
  11. N. Lee, W. K. Withanage, T. Tan, M. A. Wolak, A. Nassiri, and X. X. Xi, Hybrid physical chemical vapor deposition of magnesium diboride inside 3.9 GHz mock cavities, IEEE Trans. Appl. Supercond. 27, 3500304 (2017).
  12. M. A. Wolak, T. Tan, A. Krick, E. Johnson, M. Hambe, K. Chen, and X. X. Xi, Superconducting magnesium diboride coatings for radio frequency cavities fabricated by hybrid physical-chemical vapor deposition, Phys. Rev. ST Accel. Beams 17, 012001 (2014).
  13. J. D. Jorgensen, D. G. Hinks, and S. Short, Lattice properties of MgB2 versus temperature and pressure, Phys. Rev. B 63, 224522 (2001).

Outline

Information

Sign In to Your Journals Account

Filter

Filter

Article Lookup

Enter a citation